<--Jayme Gutierrez --> Jayme Gutierrez

Posts Tagged how to

驴C贸mo hicimos nuestro corto #Friday? how we made our animated short #Friday!

by Jayme Gutierrez Posted in making of | No Comments »

驴C贸mo hicimos nuestro corto #Friday? 隆As铆 es c贸mo! Here's how we made our animated short #Friday!锘

A look into how and why we made #Friday an animated Music Video

D.I.Y MySpam Music Video

by Jayme Gutierrez Posted in music videos | No Comments »

After all this time, I’ve come back from London and we’ve done a new and crazy music video.

This song is about all the people that are hoping to be found and survive (and maybe haver a success) with their songs or their videos or art or whatever they love to do. It’s about how to be success.

Thanks to the new technologies, we all can make ourselves heard. Internet is a fabulous way to promote our work and make money but like everything in this life, it also brings bad things like the fine line between promotion and spam.

It’s in your hands to decide if something deserves to be shared but I hope that you post it, share it, deal it, steal it, I don’t mind!
Donating coins will keep us alive!
(If you want to DONATE):
(but you can BUY it on itunes)
MySpam NEW music video: tweet it!

(or amazon)
And of course, LISTEN my music

Video Blog 14! (With the chords to ‘Clean The Fan’)

by Jayme Gutierrez Posted in vlog | 4 Comments »

Well, it’s been a while! So, here is video blog number 14! ….or 15? No, it’s 14!
Thanks to everyone for subscribing to my youtube channel, and if you haven’t already, What ya doing? It only takes two secs!
Thanks, and enjoy!

How to open a Hp Pavilion laptop/notebook!

by Jayme Gutierrez Posted in how to, music videos | 23 Comments »

It’s finished! It’s finally finished!
Here is a video about how to open (take apart, dismantle, get into..) your HP Pavilion Dv5 laptop computer!!

This is NOT a definitive maintenance video. I disclaim any responsibility for damage caused to any computer that has been taken apart, using this video as a tutorial, manual, explanation or guide.
Do not attempt to open your computer if you are not a qualified computer engineer.
Opening your computer can invalidate the warranty.
You open your computer at your own risk!

…Also, over-tightening screws or using the wrong size screwdriver can damage the screw heads.

How to SteamPunk your flash drive!

by Jayme Gutierrez Posted in making of | 2 Comments »

super punk key flash driveKeep your most treasured files safe and locked away on this steam-punk style key! “But Joe!… My life sucks, I’m really ugly and I’m really poor… I don’t have the kind of fortune needed to buy one of those…” That’s the best part! You can make it YOURSELF!* “-Huff-… But I’m dumb and depressed… I don’t have the kinda knowledge to work out how t-“ I will show you how RIGHT HERE! FOR FREE! “But I could never build-“ Shutup.

First you will need a pendrive/flashdrive/memorystick/flashdisk/dongle or whatevertheheck you wanna call it. Open it up and de-solder the 4 or in some cases 8 connections (there are 4 main connections, but you will have to also un-solder up to 4 other connections of the metal casing). Then get five other wires (or a piece of cable that already encases the 5 so it’s neater or tidyier) and solder them onto where the connectors went. steampunk pendrive connections Basically you’re extending the connections via 4 wires (and 1 earth) to the usb head connector.steampunk flashdrive

Do the same at the other end.
It should then look something like…steampunk flashdisk

Now, none of my inventions would have worked without a ‘key’ ingredient… It’s Cellotape time!
(to protect the bare metal components from the epoxy resin stuff – not sure if it’s conductive) — see below…

Here I also wrapped some pieces of thin wire in a circlet around the drive part (I twisted various wires to give the epoxy something to stick to like in modelling, but it might have been better to use very thick stuff, and just leave it bare – not cover it with epoxy…)steampunk memorystick

Now cover the thing in a 2 part epoxy resin, like “Chemical Metal” or something and wait for it to harden. Then sand, sand and sand it. Paint (first black) and then a highlight of your choice!
steampunk pendrive

Et Voila! Le Chan! Torre Eifel!
A SteamPunk key / flashdrive!
Make sure you study your computer’s usb connections before-hand to make sure it’ll fit…
Have fun destroying your device, and please don’t come crying to me… Unless it worked! Let me know if anyone out there in the CyberNet has dared risking kooking up their memorystick from this tutorial!
Let me know!


*Joe!鈩 will not be held responsible for you or anyone else frying, snapping or otherwise ballsing up their own or anyone else’s pen/hard/flash/floppy/memory stick/drive/drove/driven of any kind.